So I received the undersized 9mm sizing die and new shell holder. Ran 100 cases using the new die and a ground down shell holder. Loaded powder and bullets then chamber tested all of them. All 100 fit the chamber correctly. The final test will be to actually shoot that ammo in the FN 40 with the 9mm barrel. So far very promising.
I also received the replacement fiber optic front sight. After the final ammo test I'll be taking it to a smith to replace the sight and eliminate the magazine disconnect. Usually I'd do that myself, but the super tight pin holding the trigger group is problematic. I've hit it using a punch at my maximum comfort level and it doesn't move. Years ago I modified the FEG Hi-Power trigger myself without issue.
No comments:
Post a Comment